Automatic Coal Burning System

  • It is produced according to the measurements made under operating conditions and according to TS 4040, TS 4041 standards.
  • Burns fine coals and dust coals with high efficiency
  • Regulates the combustion system in a very short time.
  • Environment friendly.
  • Provides smokeless and full capacity burning.
  • It saves 40% compared to the manually loaded solid fuel system.
  • It is designed in all capacities and manufactured on site.
  • It burns low quality coal with high performance and it is economical.
  • It is easily used in existing solid fuel boilers.
  • Provides sufficient amount of fresh air to be sent to the burning pot.
  • It reduces the amount of unburned solid fuel.
  • It burns 0.5-30 mm coal types and nut coal with high efficiency.
  • Thanks to the sieve on it, it is prevented that foreign substances damage the stoker.
  • Coal is automatically fed into the ladle at the desired level (herringbone in the most appropriate ladle) by means of a spiral and a reducer.
  • The coal entering the crucible from the bottom is burned by means of a fan./li>
  • Since the burning coal ash pours under the chamber automatically, it feeds automatically for a long time without any attention.
  • It is fuel efficient as the system temperature is adjusted to a constant temperature with the help of a thermostat.
  • It reduces the energy loss to zero and minimizes the coal consumption. In this way, the burning rate of coal increases by 40-45%. Thus, 25-35% savings in coal consumption is achieved.